ABB IRB 7600 Series Product Manual page 69

Lifting robot with fork lift
This section details how to secure the fork lift set to the robot in order to lift and
move the robot using the fork lift ONLY!
1
2
3
4
Product manual - IRB 7600
3HAC022033-001 Revision: V
Action
If a cooling fan for the axis 1 motor is used, it
must be removed in order to use the fork lift
device!
Position the robot as shown in the figure to the
right!
Note
No load is permitted on the robot if the fork lift
set 3HAC0604-2 is used!
Fit the two spacers to the robot and secure.
CAUTION
The fork lift pocket weighs 60 kg!
© Copyright 2007 - 2018 ABB. All rights reserved.
2 Installation and commissioning
2.5.1 Lifting robot with fork lift
Note
Release the brakes if required as de-
tailed in section Manually releasing the
brakes on page 77.
m
xx0200000079
When using fork lift set 3HAC0604-2,
no load is permitted on the robot!
xx0200000387
Attachment points are shown in figure
Attachment points on robot on page
Continues on next page
Continued
67.
69