Program Editing Menu Bar - Mitsubishi Electric MELFA CR750 Series User Manual

8.4.

Program Editing Menu Bar

During program editing "File", "Edit", "Debug", and "Tool" are added to the menu bar.
The menus are as follows.
File
Edit
* The function of
"Comment Selection"
/ "Uncomment Selection" can be
used in version 1.2 or later.
* The function of
comments from all lines" can be
used in version 1.4 or later.
* The function of "Transfer all to
the controller" can be used in
version 1.6 or later.
* Multiple undo/redo can be used in
version 3.20W or later.
8-101
Figure 8-9 Program Editing Menu Bar
Menu item
Save
Save As -> PC
Save As ->
Robot
Page Setup
Undo
Redo
Undo - Position
variable
Redo - Position
variable
Cut
Copy
Paste
Copy - Position
variable
Paste - Position
variable
Find
Find in Files
Replace
"Remove
Jump
Transfer all to
the controller
Transfer to the
controller
partially
Comment
Selection
Uncommnet
Selection
Remove
comments
Explanation
Saves the program being edited with
its current name.
Saves the program being edited with
its current name on the PC
Saves the program being edited with
its current name on Robot controller
You can customize the pages the
program is printed with.
Cancel the edition by the command
and return to the previous state
Redo the edition by the command
Cancel the edition by the position
variable and return to the previous
state
Redo the edition by the position
variable
Cuts a character string from the
command being edited.
Copies a character string in the
command being edited.
Pastes the copied or cut character
string to the specified location.
Copies position data.
This pastes the copied position data.
This searches for the specified
character string.
This searches for the specified
character string in the program files.
This replaces the specified
character string with another
character string.
Jumps to the specified step number
or label.
Write the all lines of the program to
the robot controller.
This can not be used when the
program is opened in debugging
status.
Writes the selected program lines to
the robot controller.
This can not be used when the
program is opened in debugging
status.
The selected lines are exchanged by
the batch as a comment.
The comment on the selected lines
are released by the batch.
all It is possible to remove comments
from all lines in the program.
Menu item
8.7.1
8.7.2
8.7.3
8.8.3
8.6.4.2
8.6.4.1
8.6.4.3
8.6.4.4
8.6.4.5
8.6.4.6
8.6.4.7
8.6.4.8
8.6.4.9
8.6.4.11
8.6.4.10
8.6.4.17
8.6.4.18
8-101