Opening An Existing Program; Opening An Existing Program On The Computer; Opening A Program In A Robot Controller - Mitsubishi Electric MELFA CR750 Series User Manual

8.2.

Opening an Existing Program

8.2.1. Opening an existing program on the computer

Open the target project in the project tree with [Offline] -> [Program]. The stored programs are displayed on
the project tree, so double click the program you want to edit.
Figure 8-4 Opening a Program on the Computer

8.2.2. Opening a program in a robot controller

Open the target project in the project tree with [Online] -> [Program]. The stored programs are displayed on
the project tree, so double click the program you want to edit.
Figure 8-5 Opening a Program in a Robot Controller
Input the robot program name, then click the [OK] button. The "Read Item" screen is displayed, so check the
read items, then click the [OK] button. For details on the read items, see "8.2.3 Read Items when opening
program in robot controller".
If you open a program which is set "Reading protection" (displayed on the project tree), release it with
reference to "8.10 Set / Release reading protection" before you open the program.
8-97 8-97