8.1.2. Writing a new program in the robot controller
For the new program you are going to write, select [Online] -> [Program], then click the right mouse button.
The right button menu is displayed, so click [New].
Figure 8-2 Writing a New Program in a Robot Controller
Input the robot program name, then click the [OK] button. The "Read Item" screen is displayed, so check the
read items, then click the [OK] button. For details on the read items, see "8.2.3 Read Items when opening
program in robot controller".
Figure 8-3 Editing a New Program
8-96
8-96