Crnq Communications Usb Driver For Got Transparent Function / Got Communitation Installation - Mitsubishi Electric MELFA CR750 Series User Manual

1.5.5. CRnQ Communications USB driver for GOT transparent function / GOT
communitation installation
Connecting the CR750-Q/CRnQ-700 series robot controller with USB via GOT transparent mode (Bus, Direct
coupled or Ethernet) and connecting the CR750-D/CRnD-700 series robot controller with USB via GOT
communication requires installation of the USB driver for the GOT transparent function. Install with the following
procedure.
CRnQ communication GOT transparent mode is available from RT ToolBox2 Ver.1.1 or later. GOT
communication is available from RT ToolBox2 Ver.1.5 or later. Ethernet is available from RT ToolBox2 Ver.1.7 or
later.
1.5.5.1. When using Windows XP
The following indicates the procedure for installing the USB driver when using Windows (Professional)
1-40
↓
↓
↓
1) The screen shown on the left appears
when you connect the personal
computer and GOT by the USB cable.
Choose "Yes, now and every time I
connect a device" and click the [Next]
button.
2) As the screen on the left appears,
select "Install
automatically (Recommended)", then
click the [Next] button.
3) As the screen on the left appears,
click the [Continue Anyway] button to
continue the installation of the USB
driver.
(No problem will occur after
installation of the USB driver.)
the software
1-40