5.11.
Contents of Project Tree
A project tree shows the current workspace's project configuration in a hierarchical manner. You can start all
functions from the project tree, including program editing, monitor, etc.
The contents of the project tree depend on the state of connection with the robot controller.
Items are displayed for
each project.
Project 1
<Project name: RC1>
Be connected with the controller.
Project 2
<Project name: RC2>
Not connected with the controller.
(1) Offline
Displays the information stored in computer.
Displays the robot model set up currently and the name of robot programs created.
(2) Online
The "Online" section is displayed when a robot is switched into being connected online with its controller or
starts a simulation. This section displays the connected robot model and the information items that can be
referenced in the controller or a simulation controller.
(3) Backup
Controls the information backed up from the controller.
(4) Tool
Other functions are displayed.
5-68
Figure 5-14 Structure of Project Tree in Workspace
(1) Offline
(2) Online
(3) Backup
(4) Tool
5-68