Mitsubishi Electric MELFA CR750 Series User Manual page 334

16.2.2.2. Lamp
(1) Click the position (block) in which the lamp is made (<a>). The lamp is arranged at this position.
(2) After "Select item" window is displayed, click [Lamp] button (<b>).
(3) Select the lighting color of the lamp on "Create lamp" window.
(4) Click [On/Off condition] button (<c>), and set the lighting condition and the turning off condition on
"The lamp on/off condition" window.
After setting the lighting condition and the turning off condition, click [OK] button (<f>). The set
content is displayed (<d>) in the right of the [On/Off condition] button.
(5) After setting the lamp color and lighting condition and the turning off condition, click [OK] button
(<g>).
<1>
<2>
<c>
<1> Lamp color
<2> Setting
16-334
<a>
<g>
<f>
Figure 16-7 Creating a lamp
: The lighting color of the lamp can be selected.
: The condition of turning on / turning off the lamp can be set.
If only one condition is set, the lamp is operated like the other condition is set the
opposite High/Low state to the same signal number.
Moreover, when both the ON condition and the OFF condition are true, the ON condition
is given priority.
<b>
<d>
16-334