Crnq Communications Settings - Mitsubishi Electric MELFA CR750 Series User Manual

6.2.5. CRnQ Communications Settings

The CRnQ communication is the method to connect with the CR750-Q/CRnQ-700 series controller by using
the PLC Universal model QCPU module or the PLC Ethernet Interface module.
When using RS-232 or USB, please connect to connector of the PLC Universal model QCPU module.
When using Ethernet, please connect to connector of the PLC Ethernet Interface module or Built-in Ethernet
port QCPU. (*Built-in Ethernet port QCPU can be used with this software Ver.1.2 or later.)
On the CRnQ communications setting screen, when you select the computer interface, the communications
routes using the selected interface are displayed at the bottom of the screen. Select the communications route,
then press the [Detailed Settings] button. The detailed settings screen corresponding to the selected
communications route is displayed. These detailed settings will be explained from the next item.
6-82
The communication routes are displayed here.
Figure 6-5 CRnQ Communications Settings
6-82