Mitsubishi Electric MELFA CR750 Series User Manual page 422

The robot current position display and the jog operation button display for each axis use the method
selected here. Also, these displays depend on the axis configuration of the connected robot.
In the simulation mode, slider bar operation is effective. In the real robot controller, slider bar does not
appear.
When "Joint"
When "3-axis XYZ"
Figure 17-65 Screens for Jog Operation with Different Move Methods Selected
(4) Distance setting for moving
This selects the robot move distance. The robot move distances are "off", "High", and "Low".
For a detailed explanation of the move distance, see "Detailed explanations of functions and
operations" in the robot controller's user's manual.
(5) Robot current position
This displays the current robot position.
(6) Jog operations on each axis
This conducts jog operations on each robot axis.
Moves the selected robot axis in the "-" direction.
Moves the selected robot axis in the "+" direction.
These buttons move the robot while the mouse button is held down.
17-422
When "XYZ"
When "Cylinder"
When "TOOL"
When "WORK"
17-422