11.6.2.2. Device & Line
You can set the parameters related to devices and lines in the robot controller.
Figure 11-57 Ethernet parameter – Device & line (Version 3.00A or later)
Select the device to edit and click the [Set] button. The "Device parameter setting" screen is displayed.
Figure 11-58 Ethernet parameter – Device parameter setting (Version 3.00A or later)
If you select the [MELFA-3D Vision] or [Network Vision Sensor (2D)] item from the [Autoconfiguration]
combobox, contents of the screen take on the value corresponding to the selected item.
11-202
11-202