Ai2 - ABB ACSM1 Firmware Manual

13.03 AI1 MIN
Defines the minimum value for analogue input AI1. The type is selected with jumper J1 on the JCU
Control Unit.
-11...11 V / -22...22 mA
13.04 AI1 MAX SCALE
Defines the real value that corresponds to the maximum analogue input value defined by parameter
13.02 AI1 MAX.
13.02
13.05
-32768...32768
13.05 AI1 MIN SCALE
Defines the real value that corresponds to the minimum analogue input value defined by parameter
13.03 AI1 MIN. See parameter
-32768...32768
Firmware block:

AI2

(13)
Filters and scales the analogue input
AI2 signal and selects the AI2
supervision. Also shows the value of
the input.
Block outputs located in other
parameter groups
13.06 AI2 FILT TIME
Defines the filter time constant for analogue input AI2. See parameter
0...30 s
13.07 AI2 MAX
Defines the maximum value for analogue input AI2. The type is selected with jumper J2 on the JCU
Control Unit.
FW block: AI1
Minimum AI1 input value.
FW block: AI1
AI (mA / V)
AI (real)
13.04
13.03
Real value corresponding to value of parameter 13.02.
FW block: AI1
13.04 AI1 MAX
Real value corresponding to value of parameter 13.03.
[ 0.000 s ]
[ 10.000 mA ]
[ -10.000 mA ]
[ 100.000 ]
[ -100.000 ]
2.06 AI2 (page 80)
2.07 AI2 SCALED
FW block: AI2
Filter time constant for AI2.
FW block: AI2
(see above)
(see above)
(see above)
SCALE.
AI2
24
TLF7 2 msec (7)
2.06 AI2
2.07 AI2 SCALED
13.06 AI2 FILT TIME
13.07 AI2 MAX
13.08 AI2 MIN
13.09 AI2 MAX SCALE
13.10 AI2 MIN SCALE
(page 80)
(see above)
13.01 AI1 FILT
(see above)
Parameters and firmware blocks
117
TIME.