Ao2 - ABB ACSM1 Firmware Manual

0...22.7 mA
15.04 AO1 MIN
Defines the minimum value for analogue output AO1.
0...22.7 mA
15.05 AO1 MAX SCALE
Defines the real value that corresponds to the maximum analogue output value defined by
parameter 15.03
AO (mA)
15.03
15.04
15.06
-32768...32767
15.06 AO1 MIN SCALE
Defines the real value that corresponds to the minimum analogue output value defined by
parameter 15.04 AO1
-32768...32767
Firmware block:

AO2

(15)
Connects an actual signal to
analogue output AO2, and filters and
scales the output signal. Also shows
the value of the output.
Block outputs located in other
parameter groups
15.07 AO2 PTR
Selects a drive signal to be connected to analogue output AO2.
Value pointer: Group and index
15.08 AO2 FILT TIME
Defines the filtering time constant for analogue output AO2. See parameter
0...30 s
Maximum AO1 output value.
FW block:
Minimum AO1 output value.
FW block:
AO1 MAX.
AO (real)
15.05
Real value corresponding to value of parameter 15.03.
FW block:
MIN. See parameter
Real value corresponding to value of parameter 15.04.
[ SPEED ACT PERC ]
(1 / 1.02)
[ 0.100 s ]
[ 10.000 V ]
[ -10.000 V ]
[ 100.000 ]
[ -100.000 ]
2.09 AO2 (page 80)
FW block:
FW block:
Filter time constant for AO2.
AO1 (see above)
AO1 (see above)
AO (mA)
15.03
15.04
15.05
AO1 (see above)
15.05 AO1 MAX SCALE.
AO2
TLF7 2 msec
2.09 AO2
< 15.07 AO2 PTR
15.08 AO2 FILT TIME
15.09 AO2 MAX
15.10 AO2 MIN
15.11 AO2 MAX SCALE
15.12 AO2 MIN SCALE
AO2 (see above)
AO2 (see above)
Parameters and firmware blocks
AO (real)
15.06
26
(9)
15.02 AO1 FILT TIME.
121