ABB ACSM1 Firmware Manual page 182

182
50.06 FBA ACT1 TR SRC
Selects the source for fieldbus actual value 1 when parameter
FBA REF2 MODESEL
Value pointer: Group and index
50.07 FBA ACT2 TR SRC
Selects the source for fieldbus actual value 2 when parameter
FBA REF2 MODESEL
Value pointer: Group and index
50.08 FBA SW B12 SRC
Selects the source for freely programmable fieldbus status word bit 28
B12).
Bit pointer: Group, index and bit
50.09 FBA SW B13 SRC
Selects the source for freely programmable fieldbus status word bit 29
B13).
Bit pointer: Group, index and bit
50.10 FBA SW B14 SRC
Selects the source for freely programmable fieldbus status word bit 30
B14).
Bit pointer: Group, index and bit
50.11 FBA SW B15 SRC
Selects the source for freely programmable fieldbus status word bit 31
B15).
Bit pointer: Group, index and bit
Parameters and firmware blocks
FW block: FIELDBUS
is set to (0) RAW DATA.
FW block: FIELDBUS
is set to (0) RAW DATA.
FW block: FIELDBUS
FW block: FIELDBUS
FW block: FIELDBUS
FW block: FIELDBUS
(see above)
50.04 FBA REF1 MODESEL
(see above)
50.04 FBA REF1 MODESEL
(see above)
(2.13 FBA MAIN SW
(see above)
(2.13 FBA MAIN SW
(see above)
(2.13 FBA MAIN SW
(see above)
(2.13 FBA MAIN SW
/ 50.05
/ 50.05
bit 28 SW
bit 29 SW
bit 30 SW
bit 31 SW