Use Of A Function Group Number For The Identification Of Parameters - Mitsubishi Electric FR-A800 Series Instruction Manual

5.1.2
A parameter identification number shown on the PU can be switched from a parameter number to a function group number.
As parameters are grouped by function and displayed by the group, the related parameters can be set continually at a time.
 Changing a parameter identification number to a function group number
Pr.MD setting
0
1
2
Operating procedure
1.
Turning ON the power of the inverter
The operation panel is in the monitor mode.
2.
Selecting the parameter setting mode
Press
segment LCD display.)
3.
Selecting a parameter
Turn
Press
4.
Selecting the use of the function group number
Turn
setting. "
Downloaded from ManualsNet.com
Use of a function group number for the
identification of parameters
The setting of parameter identification number remains the same as
the last setting.
The parameter number is used for the identification of parameters,
and displayed in numerical order.
The function group number is used for the identification of
parameters, and displayed in alphanumeric order.
to choose the parameter setting mode. (The parameter number read previously appears on the 12-
until " " (Group parameter setting) appears.
to confirm the selection. The setting "
to change the set value to "
" and " " are displayed alternately after the setting is completed.
search engine
Description
" (initial value) will appear.
" (function group number). Press to confirm the Group parameter
5. PARAMETERS
5.1 Parameter list
1
2
3
4
5
6
7
8
9
10
201