Mitsubishi Electric FR-A800 Series Instruction Manual page 831

 400 V class
Motor model: SF-V5RUH[]K
Applicable inverter model:
FR-A840-[]K (ND rating)
Rated output power (kW)
Rated current (A)
Rated torque (N·m)
Maximum torque at 150% 60 s
(N·m)
Rated speed (r/min)
Maximum speed (r/min)
Frame No.
Inertia moment J (×10
*5
Noise
Cooling fan
(with
thermal
*7*
protector)
Recommended
8
thermal setting
Surrounding air temperature and
humidity
Structure (Protection rating)
Detector
Equipment
Insulation class
Vibration rank
Approx. mass (kg)
*1 80% output in the high-speed range. (The output is reduced when the speed is 2400 r/min or faster.) (Contact us separately for details.)
*2 The maximum speed of a 3.7 kW motor or less is 3600 r/min. Consult our sales office for use of these motor.
*3 Power (current) at 50/60 Hz.
*4 Since a brake motor has a window for gap check, the protection rating of both the cooling fan section and brake section of the motor is IP20. The
letter S in IP23S is an additional code indicating that a cooling fan was checked for water protection while it is stationary.
*5 The value shown is applicable to the motor at high carrier frequency (Pr.72 = 6 and Pr.240 = 0).
*6 A separate power supply of 12/24 V is required for the encoder. (When the FR-A8TP is installed on the inverter, the 24 V power supply from the
FR-A8TP is available.)
*7 The cooling fan is equipped with a thermal protector. The cooling fan stops when the coil temperature exceeds the specified value in order to
protect the fan motor. A restrained cooling fan or degraded fan motor insulation could be causes for the rise in coil temperature. The cooling fan
re-starts when the coil temperature drops to normal.
*8 The cooling fan voltage and input values are the basic specifications of the cooling fan alone and free air values. The input value becomes slightly
larger when it is rotated by this motor due to an increased workload, but the cooling fan can be used as it is. When preparing a thermal relay at
the user side, use the recommended thermal setting.
 Motor torque
The torque characteristics of the SF-V5RU series driven by the inverter are shown in graph form as follows.
830
8. SPECIFICATIONS
8.2 Motor rating
Downloaded from ManualsNet.com
1 2
2.2 2.2
1.5 2.2
4.2 5.8
9.55 14.1 23.6
14.3 21.1 35.4
90L 100L 112M
-4 2
67.5 105 175
kg·m )
Single-phase 200 V 50 Hz /
Voltage
Single-phase 200 to 230 V 60 Hz
*3
36/55 W (0.26/0.32 A)
Input
0.36 A
24 33
search engine
3 5 7 11 15
3.7 7.5 11 15 18.5
3.7 5.5 7.5 11 15
8.8 14.5 18.5 27.5 35.5
35.0 47.7 70.0 95.5
52.4 71.6 105 143
*2
3000
132S 132M 160M 160L
275 400 750 875
75 dB or less
22/28 W (0.11/
55/71 W (0.19/0.19 A)
0.13 A)
0.18 A
-10 to +40°C (non-freezing), 90% RH or less (non-condensing)
Totally enclosed forced ventilated (Motor: IP44, Cooling fan: IP23S)
Encoder 2048P/R, A phase, B phase, Z phase, +12 V/24 VDC power supply
Encoder, thermal protector, fan
41 52 62 99 113
18 22 30 37
22 30 37 45
*1 *1
18.5 22
30 37
44 51 67 84
118 140 191 235
176 211 287 353
1500
180M 180M 200L 200L
1725 1875 3250 3625
80 dB or less
Three-phase 380 to 400 V 50 Hz /
Three-phase 400 to 460 V 60 Hz
100/156 W (0.27/0.30 A)
0.25 A 0.39 A
*4
F
V10
138 160 238 255
45 55
55 75
*1
55
45
99 132
286 350
429 525
2400
200L 225S
3625 6850
85 dB or less
85/130 W
(0.23/0.26 A)
0.34 A
*6
255 320