Mitsubishi Electric FR-A800 Series Instruction Manual page 352

 Automatic parameter setting (Pr.999)
• Select which parameters to automatically set from the following table, and set them in Pr.999. Multiple parameter settings
are changed automatically. Refer to
Pr.999
setting
1 Sets the standard monitor indicator setting of PID control.
2 Automatically sets the monitor indicator for PID control.
Automatically sets the communication parameters for the GOT
10 connection with a PU connector ("Controller Type" in GOT:
FREQROL 500/700/800, SENSORLESS SERVO)
Automatically sets the communication parameters for the GOT
11 connection with RS-485 terminals ("Controller Type" in GOT:
FREQROL 500/700/800, SENSORLESS SERVO)
Automatically sets the communication parameters for the GOT
12 connection with a PU connector ("Controller Type" in GOT:
FREQROL 800 (Automatic Negotiation))
Automatically sets the communication parameters for the GOT
13 connection with RS-485 terminals ("Controller Type" in GOT:
FREQROL 800 (Automatic Negotiation))
50 Hz rated
20
frequency
60 Hz rated
21
frequency
NOTE
• If the automatic setting is performed with Pr.999 or the automatic parameter setting mode, the settings including the changed
parameter settings (changed from the initial setting) will be automatically changed. Before performing the automatic setting,
confirm that changing the parameters will not cause any problem.
 PID monitor indicator setting (Pr.999 = "1 or 2")
Pr.
759 PID unit selection
1142 Second PID unit selection
774 Operation panel monitor selection 1
775 Operation panel monitor selection 2
776 Operation panel monitor selection 3
C42 (934) PID display bias coefficient
C44 (935) PID display gain coefficient
1136 Second PID display bias coefficient
1138 Second PID display gain coefficient
— 3-line monitor setting
— Direct setting
— Dedicated parameter list function
*1 Enabled when the FR-LU08 (-01) is used.
*2 Enabled when the FR-PU07 is used.
*3 Enabled when the FR-PU07-01 is used.
 3-line monitor setting
On the operation panel or parameter unit, the 3-line monitor is used as the first monitor.
 Direct setting
Pressing the [FUNC] key on the FR-PU07-01 displays the direct setting screen. The PID action set point can be directly set
regardless of the operation mode or Pr.77 Parameter write selection setting.
Downloaded from ManualsNet.com
page 352
Description
Sets the related parameters of the rated
frequency according to the power supply
frequency
Name
search engine
for the list of parameters that are changed automatically.
Operation in the automatic parameter setting mode
"
"1".
"
"2".
"
"1".
—
"
"2".
—
"
"1".
—
Initial value Pr.999 = "1"
9999 9999
9999 9999
9999 9999
9999 9999
9999 9999
9999 9999
9999 9999
9999 9999
9999 9999
— Invalid
— Invalid
— Invalid
" (AUTO) → " " (PID) → Write
" (AUTO) → " " (PID) → Write
" (AUTO) → " " (GOT) → Write
" (AUTO) → " " (GOT) → Write
" (AUTO) → " " (F50) → Write
Pr.999 = "2" Refer to page
4
615
4
52
53 446
54
0
100
615
0
100
*1*2*3
—
Enabled
*3
—
Enabled
*3
—
Enabled
5. PARAMETERS
5.7 (E) Environment setting parameters
1
2
3
4
5
6
7
8
9
10
351