Mitsubishi Electric FR-A800 Series Instruction Manual page 510

4.
Calibration parameter selection
Turn
5.
Selecting a parameter
Turn
"
6.
Analog voltage (current) display
Press
7.
Analog voltage (current) adjustment
When
Turn
8.
Setting completed
Press
alternately.
• Turn
• Press
• Press
NOTE
• Press
Downloaded from ManualsNet.com
until " " appears. Press
until " " (C4 (Pr.903) Terminal 2 frequency setting gain) appears for terminal 2, or
" (C7 (Pr.905) Terminal 4 frequency setting gain) for terminal 4.
to display the analog voltage (current) value (%) currently applied to terminal 2 (4).
is turned, the gain voltage (current) value (%) currently set to the parameter appears.
until the desired gain voltage (current) value (%) appears.
to confirm the selection. The analog voltage (current) % and "
to read another parameter.
to return to the "
twice to show the next parameter.
after step 6 to check the present bias/gain frequency setting. The setting cannot be checked after step 7.
search engine
to display "
" display.
".
(
5. PARAMETERS
5.12 (T) Multi-function input terminal parameters
1
2
3
4
5
6
)" are displayed
7
8
9
10
509