Mitsubishi Electric FR-A800 Series Instruction Manual page 603

Pr.
610 PID measured value
A625 input selection
1015 Integral stop selection at
A607 limited frequency
753 Second PID action
A650 selection
Second PID control
754
automatic switchover
A652
frequency
755 Second PID action set
A651 point
756 Second PID proportional
A653 band
757
Second PID integral time 1 s
A654
758 Second PID differential
A655 time
1140 Second PID set point/
A664 deviation input selection
1141 Second PID measured
A665 value input selection
1143
Second PID upper limit
A641
1144
Second PID lower limit
A642
1145 Second PID deviation
A643 limit
1146 Second PID signal
A644 operation selection
Second output
1147
interruption detection
A661
time
Second output
1148
interruption detection
A662
level
1149 Second output
A663 interruption cancel level
602
5. PARAMETERS
5.14 (A) Application parameters
Downloaded from ManualsNet.com
Name Initial value
3
0
0
9999
9999
100
9999
2
3
9999
9999
9999
0
1 s
0 Hz
1000%
search engine
Setting range
1 The measured value is input through terminal 1.
2 The measured value is input through terminal 2.
3 The measured value is input through terminal 4.
4 The measured value is input via communication.
5 The measured value is input by the PLC function.
Integral stopped at the limit, manipulation range of ±100%, integral
0
cleared during output interruption
Integral continued at the limit, manipulation range of ±100%,
1
integral cleared during output interruption
Integral stopped at the limit, manipulation range of 0 to 100%,
2
integral cleared during output interruption
Integral stopped at the limit, manipulation range of ±100%, integral
10
stopped during output interruption
Integral continued at the limit, manipulation range of ±100%,
11
integral stopped during output interruption
Integral stopped at the limit, manipulation range of 0 to 100%,
12
integral stopped during output interruption
0, 10, 11, 20, 21,
50, 51, 60, 61, 70,
71, 80, 81, 90, 91,
100, 101, 1000, Refer to Pr.128.
1001, 1010,
1011, 2000,
2001, 2010, 2011
0 to 590 Hz, 9999 Refer to Pr.127.
0 to 100%, 9999 Refer to Pr.133.
0.1 to 1000%,
Refer to Pr.129.
9999
0.1 to 3600 s,
Refer to Pr.130.
9999
0.01 to 10 s, 9999 Refer to Pr.134.
1 to 5 Refer to Pr.609.
1 to 5 Refer to Pr.610.
0 to 100%, 9999 Refer to Pr.131.
0 to 100%, 9999 Refer to Pr.132.
Refer to Pr.553.
0 to 100%, 9999 (The Y205 signal is
output.)
0 to 3, 10 to 13 Refer to Pr.554.
0 to 3600 s, 9999 Refer to Pr.575.
0 to 590 Hz Refer to Pr.576.
900 to 1100% Refer to Pr.577.
Description
Set the second PID control.
For how to enable the second PID
control, refer to page 613.