Mitsubishi Electric FR-A800 Series Instruction Manual page 776

 Fault history clearing procedure
• Set Err.CL Fault history clear = "1" to clear the fault history.
Operating procedure
1.
Turning ON the power of the inverter
The operation panel is in the monitor mode.
2.
Selecting the parameter setting mode
Press
3.
Selecting the parameter number
Turn
(initial value) appears.
4.
Fault history clear
Turn
"
• Turn
• Press
• Press
Downloaded from ManualsNet.com
to choose the parameter setting mode. (The parameter number read previously appears.)
until "
to change the set value to "
" and " " are displayed alternately after parameters are cleared.
to read another parameter.
to show the setting again.
twice to show the next parameter.
search engine
" (Fault history clear) appears. Press
". Press to start clearing.
to read the present set value. "
6. PROTECTIVE FUNCTIONS
6.3 Check and clear of the fault history
1
2
3
4
5
"
6
7
8
9
10
775