Figure 13.51 Example Of 32-Bit Data Width Mpx Connection - Hitachi SH7751 Hardware Manual

SH7751 Series
CKIO
RD/
D31–D0

Figure 13.51 Example of 32-Bit Data Width MPX Connection

The MPX interface timing is shown below.
When the MPX interface is used for areas 1 to 6, a bus size of 32 bit should be specified in BCR2.
For wait control, waits specified by WCR2 and wait insertion by means of the
used.
In a read, one wait cycle is automatically inserted after address output, even if WCR2 is cleared to
0.
Rev. 3.0, 04/02, page 434 of 1064
MPX device
CLK
I/O31–I/O0


pin can be