Open Seams - HP Designjet 3D Service Manual

Open seams

Characteristics: Visible gap in the model material.
Corrective actions:
1. Check the height of the brush and flicker.
2. Verify wall thickness is greater than: 0.040" for 0.010" slice.
3. Reprocess the part using the latest version of HP Designjet 3D Software
Solution and check STL report for errors.
4. Repair STL file with original CAD program.
5. Possible bad head motor cable. Replace umbilical cable.
6. Possible bad head motor. Replace toggle head assembly.
-141