Chamber Fans; Removing The Right Side Chamber Fan - HP Designjet 3D Service Manual

Chamber Fans

Required Tools
5
• ⁄ " nut driver or standard screwdriver.
16
5
• ⁄ " box wrench
16
Hardware
3
• 10-32 x ⁄ " slotted screws (x8)
8
1
• 8-32 x ⁄ " slotted screws (x4)
2

Removing the right side chamber fan

1. Remove the top panel. See
2. Remove the side panels. See
5
3. Using a ⁄ " nut driver or standard screwdriver, remove the 4 mounting
16
screws from the right side heater panel. See
Figure 284: Right side heater panel mounting screw locations
Remove the 4 mounting
screws
5
4. Using a ⁄ " box wrench, remove the 2 chamber fan mounting screws.
16
See Figure 285.
Figure 285: Right side chamber fan mounting screw locations
"Removing the top panel" on page 161
"Removing the side panels" on page 162
Figure 284.
-307