Z Stage Components; Z Home Sensor; Removing The Z Home Sensor - HP Designjet 3D Service Manual

Z Stage Components

Z Home Sensor

Required Tools
Hardware

Removing the Z home sensor

1. Open the chamber door.
2. Lower the Z stage all of the way down.
3. Disconnect the Z home sensor cable by pressing in on the tab and pull-
4. Using a
-304
1
• ⁄ " nut driver or standard screwdriver.
4
3
• 6-32 x ⁄ " slotted screw (x1)
8
ing outward. See Figure 280.
Figure 280: Z home sensor cable location
1
⁄ " nut driver or standard screwdriver, remove the mounting
4
screw. See Figure 281.
Disconnect Z Home
cable