Setting The Static Network In Windows 7; Setting The Static Network On Printer - HP Designjet 3D Service Manual

10. Enter the IP address, Subnet Mask and Default Gateway. Contact your IT
1 1. Click on the OK button when finished. Close any open networking win-

Setting the static network in Windows 7:

1. From your workstation click on the Start Menu.
2. Click on the Control Panel button.
3. Double click on Network and Internet.
4. Double click on the Network and Sharing Center icon.
5. Double click Local Area Connection.
6. Click on the Properties button.
7. Select Internet Protocol Version 4 (TCP/IPv4) from the list.
8. Click on the Properties button.
9. Click on the Use the following IP address option.
10. Enter the IP address, Subnet Mask and Default Gateway. Contact your IT
1 1. Click on the OK button when finished. Close any open networking win-

Setting the static network on printer:

1. Obtain your static network address from your Network Administrator.
2. From Idle (or Ready to Build), press Maintenance on the display panel.
3. Press System.
4. Press Set Network. The top window displays: Network Admin - Static IP
5. Press Static IP to display default settings.
6. Update the IP address:
7. Use the three functions listed above to set your IP address.
8. After setting the final digit of the Internet Protocol (IP) address, move the
-28
Administrator or Internet Service Provider for details regarding IP
address information.
dows.
Administrator or Internet Service Provider for details regarding IP
address information.
dows.
The display will show Maintenance and the software version.
Address; UDN.
IP Address:172.016.075.020 or 198.000.000.001
NM Address:255.255.000.000
GW Address:172.018.100.002
NOTE: These values are the factory defaults and MUST be
changed. If these values are not changed the printer will continue
to restart until they are changed.
Press Increment to increase the value one digit at a time.
Press Next Digit to move the cursor one place to the right.
Press Last Digit to move the cursor one place to the left.
cursor one more place to the right. The cursor moves to the Netmask