HP Designjet 3D Service Manual page 285

Figure 227: Lower Y drive rod mounting screw locations
5
24. Using a ⁄ " nut driver or standard screwdriver, remove the 2 Y drive
16
rod mounting screws. See
Figure 228: Y drive rod mounting screws
Left side mounting screw
25. Locate and remove the 4 upper Y drive rod mounting screws with a
nut driver or standard screwdriver. See
Lower Y drive rod mounting
screw locations
Figure 228.
Right side mounting screw
Figure 229.
5
⁄ "
16
-269