HP Designjet 3D Service Manual page 329

Figure 291: Left side heater panel mounting screw locations
Remove the 4
mounting screws
3
4. Using a ⁄ " nut driver, remove the white power wire from the right
8
mounting post. See Figure 292.
3
5. Using a ⁄ " nut driver, remove the black power wire from the left mount-
8
ing post. See Figure 292.
Figure 292: Power wire locations
Remove the black
power wire
Remove the white
power wire
5
6. Using a ⁄ " nut driver or standard screwdriver, remove the left and
16
right mounting screws. Do not lose the insulating washers as they are
need for reinstallation. See Figure 293.
-313