Removing The Toggle Bar - HP Designjet 3D Service Manual

Removing the toggle bar:

1. Unload model and support material.
2. Power the printer down.
3. Open chamber door and remove the head cover. See
4. Using a
5. Remove the tips by pulling them downwards. See
-228
Figure 159: Head cover tab locations
Press tab in to
release head
cover
7
⁄ " allen wrench, loosen but do not remove the 4 tip mounting
64
screws. See (Figure 160)
Figure 160: Tip mounting screw locations
(Figure 159)
Press tab in to
release head
cover
(Figure 161)