HP Designjet 3D Service Manual page 327

Figure 288: Right side heater panel mounting screw locations
Remove the 4
mounting screws
4. Remove the black power wire from the right mounting post with a
nut driver. See Figure 289.
5. Remove the white power wire from the left mounting post with a
driver. See Figure 289.
Figure 289: Power wire locations
6. Remove the left and right mounting screws with a
dard screwdriver. Do not lose the insulating washers as they are need
for reinstallation. See Figure 290.
3
⁄ "
8
3
⁄ " nut
8
Remove the white
power wire
Remove the black
power wire
5
⁄ " nut driver or stan-
16
-311