HP Designjet 3D Service Manual page 348

Hide thumbs Also See for Designjet 3D:

Table of Contents

33. Raise the Z Stage until it contacts the dial indicator. Continue to raise the

Z stage approximately two additional revolutions of the dial indicator.

Wedge a screw driver or similar object between the underside of the

table and the bottom of the chamber to prevent the Z stage from moving

34. Move the dial indicator to the back left (BL) corner and zero the dial

35. Move the dial indicator to the front left (FL) corner and write down the

36. Move the dial indicator to the front right (FR) corner and write down the

37. Move the dial indicator to the back right (BR) corner and write down the

38. Enter the values that are written down into the XY level worksheet. Use

the 8x6 worksheet for HP Designjet 3D, see

worksheet for HP Designjet Color 3D, see

Troubleshooting