User Manual - Philips LPC2101 User Manual

Philips Semiconductors
Volume 1
If the AA bit is reset during a transfer, the I
to SDA after the next received data byte. While AA is reset, the I
to its own slave address or a general call address. However, the I
and address recognition may be resumed at any time by setting AA. This means that the
AA bit may be used to temporarily isolate the I

User manual

2
C block will return a not acknowledge (logic 1)
Rev. 01 — 12 January 2006
Chapter 11: I
2
C block does not respond
2
C-bus is still monitored
2 2
C block from the I C-bus.
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
UM10161
2
C interfaces
135