Epson C Series Maintenance Manual page 512

6-axis robots

Hide thumbs Also See for C Series:

Table of Contents

C12 Maintenance 4. Cable Unit

F-sensor connector:

Open the clips on the both ends of the connector and pull it out.

9. Remove the ground wire terminals.

Cross recessed head screws with washer:

: 9-M4×8, 2-M3×6

10. Remove the brake power supply.

Cross recessed head screws with washer: 2-M3×6

11. The subsequent steps are the same as those for the M/C cable (backward).

For details, refer to C12 Maintenance: 4.1.1 Replacing the Cable Unit (M/C Cable Backward),

Removal steps (13) to (54).

C Series Maintenance Manual Rev.2