Joint #4 - Replacing The Timing Belt; Removal: Joint #4 Timing Belt; Installation: Joint #4 Timing Belt - Epson C Series Maintenance Manual

6-axis robots

Hide thumbs Also See for C Series:

Table of Contents

C4 Maintenance 8. Joint #4

8.3 Joint #4 - Replacing the Timing Belt

Maintenance Parts

1. Remove the Joint #4 motor unit.

For details, refer to C4 Maintenance: 8.1 Joint #4 – Replacing the Motor, Installation steps (1) through

2. Remove the Joint #4 timing belt.

1. Place the Joint #4 timing belt around the Joint #4 pulley 2.

2. Install the Joint #4 motor unit.

For details, refer to C4 Maintenance: 8.1 Joint #4 – Replacing the Motor, Installation steps (6) through

Joint #4 timing belt

Hexagonal wrench

(width across flats: 3 mm)

Cross-point screwdriver

Torque wrench

For M4 hexagon socket head cap bolts

For belt tension adjustment

C Series Maintenance Manual Rev.2