Toshiba GR200 Series Instruction Manual page 317

Recommended setting for the voltage level
(ii)
As the threshold voltage is expressed with Table 4.5-5, the user should set High or Low to
match to the voltage value to input to PWS. Table 4.5-6 shows the recommended setting.
After that, the user should set the threshold voltage about the picking-up/dropping-off of the
binary input (see Chapter:
Table 4.5-6 Recommended setting for the voltage level
(a) In the case of DC rated voltage "110-250 Vdc"
Voltage value to
input to PWS
250V
220V
125V
110V
(b) In the case of DC rated voltage "24-60 Vdc"
Voltage value
to input to PWS
60V
48V
30V
24V
Technical description: Binary IO module (BI, BO and BIO)
Recommended setting for the voltage level
High
Recommendation for setting for the voltage level
High
- 303 -
Low
Low
Centralized GRB200
6F2S1931 (0.20)
).
(Soft: 030, 031, 032, 033, 034)