Toshiba GR200 Series Instruction Manual page 706

SNTP menu
IP address of SNTP server can be set by the following procedure.
Time Sync
10:48 2/5
TimeSyncSrc +
SNTP
_SNTP +>
On
BI SYNC +>
Off
SNTP
10:48 1/4
_Server1
0. 0. 0. 0
Server2
0. 0. 0. 0
Server3
0. 0. 0. 0
SNTP
10:48 1/4
Server1
0. 0. 0.176
Server2
0. 0. 0. 0
Server3
0. 0. 0. 0
Figure 11.7-9 SNTP
BI SYNC menu
When the "BI SYNC" is set to On in Time Sync menu, the user can choose a binary input circuit
(BI) as a synchronization standard. Adjustment setting 'SYNC_ADJ' is provided.
Binary synchronization function can be set by the following procedure.
BI SYNC
10:48 1/2
BI_ID +
No Assign
SYNC_ADJ +
0.000 s
Figure 11.7-10 BISYNC
(1) Confirm that the SNTP synchronization function has been set for
On. Move cursor to the SNTP menu and press ►.
(2) Move cursor to desired server number and press ENTER.
+
+
+
(3) The user can set IP address using ▲ or ▼ by each digit.
When the user has finished setting IP address of the server, press
+
ENTER.
+
+
(1) Enter the Data ID of the BI output
(2) Set adjustment time for [SYNC ADJ]
- 692 -
6F2S1931 (0.20)
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)