Toshiba GR200 Series Instruction Manual page 701

BO1
10:48 1/1
[ ENTER]
BO1_CPL +
_ On
[ CANCEL ]
Selection and setting of LED
(iv)
As shown in Figure 11.1-1, the IED provides 26 LEDs and 7 function-keys. The user can
configure LEDs ("LED#3" to "LED#26") and the function key LEDs (F1 to F7; each has a LED).
Each LED is driven via a logic gate which can be programed to be an AND gate, OR gate or
XOR gate operation. Furthermore, each LED has a programmable reset characteristic, settable
for instantaneous drop-off, or for latching operation. One or up to eight signals can be assigned
to a single LED with selectable LED color.
Selection of LED: Figure 11.6-8 shows the LED selection screen; the user can
select a setting item by pressing keys ▲ and ▼. Press key ► to go to the next
level in the hierarchy.
Select Function
10:48 1/15
_Input Signal1
No Assign
Input Signal2
No Assign
Input Signal3
No Assign
Figure 11.6-7 Assigning a signal
- 687 -
Select Function
10:48
[▼]
+ No Assign
_CBP_DIF
+ CBP_CBF
CBP_EFP
+ CBP_FS
CBP_TRS
[►]
Select Element
10:48
No Assign
_DIFCH_A
DIFCH_B
DIFCH_C
DIFCH-IDSV8E00F01B67
...
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)
6F2S1931 (0.20)
1/6
412B01>
456B01>
457B01>
48CB01>
4A2B01>
[CANCEL]
2/155
8000F01C20
8100F01C21
8200F01C22