Toshiba GR200 Series Instruction Manual page 793

4. PIXIT FOR ASSOCIATION MODEL
ID Ed
Maximum number of clients that can set-up an
As1 1
association simultaneously
TCP_KEEPALIVE value.
As2 1,2
The recommended range is 1..20s
As3 1,2 Lost connection detection time
As4 - Authentication is not supported yet
What association parameters are necessary for
As5 1,2
successful association
If association parameters are necessary for
As6 1,2
association, describe the correct values e.g.
What is the maximum and minimum MMS PDU
As7 1,2
size
What is the maximum start up time after a
As8 1,2
power supply interrupt
Does this device function only as test equipment?
(test equipment need not have a non-volatile
As9 1,2
configuration; but it cannot be part of the
substation automation system)
Description
- 779 -
6F2S1931 (0.20)
(PIXIT Ed.1&Ed.2)
Value / Clarification
6
Configurable from 1 to 20 seconds
(default is 20 seconds)
From 10 to 30 seconds
(TCP_KEEPALIVE + 10sec.)
N
Transport selector
Session selector
Presentation selector
AP Title
AE Qualifier
N.A.
Max MMS PDU size
Min MMS PDU size
limited. It depends
on a request.
Typically about 130 seconds
Please check LCD
Monitoring -> Communication
-> 61850STAT as "Active"
(Note) The startup time depends
on the type of IED and
Its configuration/setting.
N
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)
N
N
N
N
N
16384
Not