Toshiba GR200 Series Instruction Manual page 664

LED
Label
No.
1 IN SERVICE
2 ERROR
3 N/A
1
4 TRIP
1
5 N/A
1
6 TEST
1
7 N/A
1
. N/A
. .
. .
. .
26 N/A
1
Note: LEDs are user-configurable. Users can use them with or without latch function.
1
Note: For setting LEDs, see section 11.6(iv).
2
Function keys
(iv)
Seven function keys (F1 to F7) have the following two features.
Skip to a specific screen directly, set by the user.

Used for skipping to a set page by pressing the function keys. Press again to return to the
previous page. Set by pressing the function key for 2 seconds on the selected page. (See
section 11.5(v)-1)
Test signal generator.

A convenient method that can be used for operating binary signals. Set by assigning the
signal in the settings menu. (See section 11.5(v)-2)
Table 11.1-2 Features of Function keys (F1 to F7)
Labels on Keys
LED†
F1 to
†Note: The user can program to light the LEDs by itself. Setting are similar to the ones
of the Table 11.1-1 (For setting, see section 11.6(iv)). Note the manufacture
programs to light the respective LEDs in default prior to shipping.
Operation keys
(v)
By using the operation keys, the user can display records, relay status etc. Input of setting
Table 11.1-1 LED labels and their color
Color
Green
Red
N/A
Red
N/A
Yellow
N/A
N/A
.
.
.
N/A
Skip to a specific screen directly.
Control for the operation of pre-assigned
F7
binary signals.
- 650 -
User configurable
setting
2
Lit up when the IED
N/A
Lit up when an error
N/A
✔
✔
✔
✔
✔
✔
.
.
.
✔
Feature and Remark
6F2S1931 (0.20)
Remarks
is in service.
is occurred.
Default
Default
.
.
.
.
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)