Toshiba GR200 Series Instruction Manual page 589

Table 10.3-10 GOOSE statutes and signal outputs
Signal values LCD screen messages
0x0000
0xC000
0xC010
0xC040
0xC080
When the user wishes to see GOOSE outputs†, the user can see them by user's PLC logic, but
the user should build its logic using the PLC function. Table 10.3-11 shows the GOOSE signals,
which the user can select. For example, in order to get the GRL200_Bay1_4 information, the
user should take the GOOSE content using SUB_QUAL#3 output.
Data ID
301101 3100001001
301101 3100011001
301101 3100021001
301101 3100031001
301101 3100041001
~~~
301101 31013E1001
301101 31013F1001
†Note: The user cannot view GOOSEs signal lists on the GR-TIMES engineering.
Feature of IEC61850 Edition1 option
10.3.9
The IED can have Private logical nodes, which are provided in Editon1_option, which are
designed in Toshiba private specification exclusively. The user can select and add the following
Data object:
LD Class DO
GGIO AnInDatUpd
Note: The option1 is designed to transfer the metering values during the fault on the
IEC61850 Edition1.
OK
NG
NG
NG
NG
Table 10.3-11 GOOSE output signals
Signal names
SUB_QUAL#0 GOOSE subscription quality status
SUB_QUAL#1 GOOSE subscription quality status
SUB_QUAL#2 GOOSE subscription quality status
SUB_QUAL#3 GOOSE subscription quality status
SUB_QUAL#4 GOOSE subscription quality status
~~~
SUB_QUAL#318 GOOSE subscription quality status
SUB_QUAL#319 GOOSE subscription quality status
Table 10.3-12 LD class in Editon1 option
Content
DataUpdate Trigger is provided for general Data
Object. The structure is the same as AnIn.
- 575 -
GR-TIEMS screen messages
GOOD
QUESTIONABLE
QUESTIONABLE | TEST
QUESTIONABLE | INACCURATE
QUESTIONABLE | INCONSISTENT
Descriptions
~~~
6F2S1931 (0.20)
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)