Toshiba GR200 Series Instruction Manual page 625

Oct.
4 Start
Control field
5
6 Address
7 Type identification (Type ID)
8 Variable structure qualifier
9 Cause of transmission (COT)
10 Common address of ASDU
11 Function type (FUN)
12 Information number (INF)
Double point information (DPI)
13
14 Millisecond (low)
15 Millisecond (high)
16 Minutes + Invalid flag (MSB)
17 Hours + Summer time flag (MSB)
Supplementary information (SIN)
18
19 Checksum
20 End
Any comment with maximum 16 characters can be entered. This setting does not affect
the function in the IEC 60870-5-103 communication.
Description
Any comment with maximum 16 characters can be entered. This setting does not affect the
function in the IEC 60870-5-103 communication.
Type ID
Type ID=20 (General command) is fixed.
INF
Information number (INF) of the frame is set. The INF can be set to 0 to 255. When the
standard frame is provided†, the INF according to the standard is recommended. If the
frame out of standard is provided, the INF should be set referring Table 10.4-12 and the
appendix†.
Table 10.4-12
†Note: For more information, see
Item
INF category of Monitor direction
INF
0 to 15
16 to 31
32 to 239
240 to 255
Appendix: IEC 60870-5-103 interoperability
- 611 -
Value
68H
08H+ACD+
DFC
1-254 Setting from the relay
1 Customized by GR-TIEMS
81H
20/21 Customized by GR-TIEMS
1-254 Linked with Address setting
0-255 Customized by GR-TIEMS
Customized by GR-TIEMS.
0-255
Answer back of receiving
command INF
Answer back of receiving
1/2
command DCO
0-59999
0-59+80H
0-23+80H
Answer back of receiving
0-255
command RII
16H
Category
system functions
status
not used
generic functions
6F2S1931 (0.20)
Remarks
.
Centralized GRB200
(Soft: 030, 031, 032, 033, 034)