Motorola DSP96002 User Manual page 4

SIGNAL DESCRIPTION AND BUS OPERATION
2.1 PINOUT
The functional signal groups of the DSP96002 are shown in Figure 2-2, and are described in the following
sections. A pin allocation summary is shown in Figure 2-1. Specific pinout and timing information is avail-
able in the DSP96002 Technical Data Sheet (DSP96002/D).
2.1.1 Package
The DSP96002 is available in a 223 pin PGA package. There are 176 signal pins (including 5 spares), 17
power pins and 30 ground pins. All packaging information is available in the data sheet.
2.1.2 Interrupt And Mode Control (4 Pins)
— — — — –
R E S E T (Reset) - active low, Schmitt trigger input.
to the input clock (CLK). When asserted, the chip is placed in the reset state and the
internal phase generator is reset. The Schmitt trigger input allows a slowly rising input
(such as a capacitor charging) to reliably reset the chip. If
serted synchronous to the input clock (CLK), exact startup timing is guaranteed, allow-
ing multiple processors to startup synchronously and operate together in "lock-step".
When the
from the MODA, MODB and MODC pins.
— — — –
MODA/ I R Q A(Mode Select A/External Interrupt Request A) - active low input,
synchronized to the input clock (CLK). MODA/
operating mode during hardware reset and becomes a level sensitive or negative edge
triggered, maskable interrupt request input during normal
MODA, MODB and MODC select one of 8 initial chip operating modes, latched into the
operating mode register (OMR) when the
—
R Q
resynchronized using the WAIT instruction and asserting
state. If the processor is in the STOP standby state and
processor will exit the STOP state.
MOTOROLA
SECTION 2
— — — — –
R E S E T pin is deasserted, the initial chip operating mode is latched
–
A is asserted synchronous to the input clock (CLK), multiple processors can be
DSP96002 USER'S MANUAL
— — — — –
R E S E T is internally synchronized
— —
R
— — — –
I R Q A selects the initial chip
instruction processing.
— — — — –
R E S E T pin is deasserted. If
— — —
I R
— — —
I R
— — –
E S E T is deas-
internally
— —
I
–
Q A to exit the wait
–
Q A is asserted, the
2 - 1