ABB ACS350 User Manual page 146

146
Actual signals
No. Name/Value
0307 FAULT WORD 3
0308 ALARM WORD 1
0309 ALARM WORD 2
Actual signals and parameters
Description
Bit 9 = DRIVE ID
Bit 10 = CONFIG FILE
Bit 11 = SERIAL 1 ERR
Bit 12 = EFB CON FILE. Configuration file reading error.
Bit 13 = FORCE TRIP
Bit 14 = MOTOR PHASE
Bit 15 = OUTP WIRING
A 16-bit data word. For the possible causes and remedies and fieldbus
equivalents, see chapter Fault
Bit 0...2 = Reserved
Bit 3 = INCOMPATIBLE SW
Bit 4...10 = Reserved
Bit 11 = MMIO ID ERROR
Bit 12 = DSP STACK ERROR
Bit 13 = DSP T1...T3 OVERLOAD
Bit 14 = SERF CORRUPT /SERF MACRO
Bit 15 = PAR PCU 1/2 / PAR HZRPM / PAR AI SCALE / PAR AO SCALE
/ PAR FBUS MISS / PAR CUSTOM U/F
A 16-bit data word. For the possible causes and remedies and fieldbus
equivalents, see chapter Fault
An alarm can be reset by resetting the whole alarm word: Write zero to
the word.
Bit 0 = OVERCURRENT
Bit 1 = OVERVOLTAGE
Bit 2 = UNDERVOLTAGE
Bit 3 = DIRLOCK
Bit 4 = IO COMM
Bit 5 = AI1 LOSS
Bit 6 = AI2 LOSS
Bit 7 = PANEL LOSS
Bit 8 = DEVICE OVERTEMP
Bit 9 = MOTOR TEMP
Bit 10 = UNDERLOAD
Bit 11 = MOTOR STALL
Bit 12 = AUTORESET
Bit 13...15 = Reserved
A 16-bit data word. For the possible causes and remedies and fieldbus
equivalents, see chapter Fault
An alarm can be reset by resetting the whole alarm word: Write zero to
the word.
Bit 0 = Reserved
Bit 1 = PID SLEEP
Bit 2 = ID RUN
tracing.
tracing.
tracing.
FbEq