How To Perform The Guided Start-Up - ABB ACS350 User Manual

How to perform the guided start-up

To be able to perform the guided start-up, you need the Assistant Control Panel.
Before you start, ensure that you have the motor nameplate data on hand.
The start-up may only be carried out by a qualified electrician.
The safety instructions given in chapter
procedure.
Check the installation. See the checklist in chapter
Check that the starting of the motor does not cause any danger.
De-couple the driven machine if:
• there is a risk of damage in case of incorrect direction of rotation, or
• an ID Run needs to be performed during the drive start-up. ID Run is essential only in
applications that require the ultimate in motor control accuracy.
Apply input power. The control panel first asks if you want to use
the Start-up Assistant.
• Press OK (when
Assistant.
EXIT
• Press if you do not want to run the Start-up Assistant.
• Press key to highlight
make the panel ask (or not ask) the question about running the
Start-up Assistant again the next time you switch on the power to
the drive.
If you decided to run the Start-up Assistant, the display then asks
you to select the language. Scroll to the desired language with
keys / and press
If you press EXIT , the Start-up Assistant is stopped.
The Start-up Assistant now guides you through the set-up tasks,
starting with the motor set-up. Set the motor data to exactly the
same value as on the motor nameplate.
Scroll to the desired parameter value with keys
SAVE
press to accept and continue with the Start-up Assistant.
Note: At any time, if you press
stopped and the display goes to the Output mode.
SAFETY
POWER-UP
is highlighted) to run the Start-up
Yes
and then press
No
SELECTING THE LANGUAGE
SAVE
to accept.
STARTING THE GUIDED SET-UP
EXIT
, the Start-up Assistant is
Safety must be followed during the start-up
Installation checklist.
OK if you want to
/ and
Start-up, control with I/O and ID Run
REM CHOICE
Do you want to
use the start-up
assistant?
Yes
No
EXIT OK
00:00
REM CHOICE
Show start-up
assistant on
next boot?
Yes
No
EXIT 00:00 OK
REM PAR EDIT
9901 LANGUAGE
ENGLISH
[0]
EXIT 00:00 SAVE
REM PAR EDIT
9905 MOTOR NOM VOLT
220 V
EXIT 00:00 SAVE
51