ABB ACS350 User Manual page 179

Parameters – complete descriptions
Index Name/Selection
DI5(INV)
UP
DI1
DI2
DI3
DI4
DI5
DOWN
1911 CNTR S/S
COMMAND
DI1(INV)
DI2(INV)
DI3(INV)
DI4(INV)
DI5(INV)
NOT SEL
DI1
DI2
DI3
DI4
DI5
ACTIVATE
Description
See selection DI1(INV).
Counts up
Counter direction selection through digital input DI1. 0 = counts up,
1 = counts down.
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
Counts down
Selects the source for the drive start/stop command when parameter
EXT1 COMMANDS value is set to COUNTER START / COUNTER STOP.
Start/stop command through inverted digital input DI1.
When par. 1001 value is COUNTER STOP: 0 = start. Stop when counter limit
defined by parameter 1905
When par. 1001 value is COUNTER START: 0 = stop. Start when counter
limit defined by parameter
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
Not start/stop command source
Start/stop command through digital input DI1.
When par. 1001 value is COUNTER STOP: 1 = start. Stop when counter limit
defined by parameter 1905
When par. 1001 value is COUNTER START: 1 = stop. Start when counter
limit defined by parameter
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
External start/stop command, e.g. through fieldbus
COUNTER LIMIT has been exceeded.
1905 has been exceeded.
COUNTER LIMIT has been exceeded.
1905 has been exceeded.
Def, FbEq
-5
0
1
2
3
4
5
6
1001 NOT SEL
-1
-2
-3
-4
-5
0
1
2
3
4
5
6
Actual signals and parameters
179