ABB ACS350 User Manual page 229

Parameters – complete descriptions
Index Name/Selection
8403 SEQ PROG PAUSE
DI1(INV)
DI2(INV)
DI3(INV)
DI4(INV)
DI5(INV)
NOT SEL
DI1
DI2
DI3
DI4
DI5
PAUSED
8404 SEQ PROG RESET
DI1(INV)
DI2(INV)
DI3(INV)
DI4(INV)
DI5(INV)
NOT SEL
DI1
DI2
DI3
DI4
DI5
RESET
8405 SEQ ST FORCE
STATE 1
STATE 2
STATE 3
STATE 4
STATE 5
STATE 6
STATE 7
Description
Selects the source for the sequence programming pause signal. When
sequence programming pause is activated all timers and outputs (RO/TO/
AO) are freezed. Sequence programming state transition is possible only by
parameter 8405 SEQ ST FORCE.
Pause signal through inverted digital input DI1. 0 = active, 1 = inactive.
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
No pause signal
Pause signal through digital input DI1. 1 = active, 0 = inactive.
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
Sequence programming pause enabled
Selects the source for the sequence programming reset signal. Sequence
programming state (0168
timers and outputs (RO/TO/AO) are set to zero.
Reset is possible only when sequence programming is stopped.
Reset through inverted digital input DI1. 0 = active, 1 = inactive.
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
No reset signal
Reset through digital input DI1. 1 = active, 0 = inactive.
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
Reset. After reset parameter value is automatically set to NOT SEL.
Forces the sequence programming to a selected state.
Note: State is changed only when sequence programming is paused by
parameter 8403 SEQ PROG PAUSE and this parameter is set to the selected
state.
State is forced to state 1.
State is forced to state 2.
State is forced to state 3.
State is forced to state 4.
State is forced to state 5.
State is forced to state 6.
State is forced to state 7.
SEQ PROG STATE) is set to the first state and all
Def, FbEq
NOT SEL
-1
-2
-3
-4
-5
0
1
2
3
4
5
6
NOT SEL
-1
-2
-3
-4
-5
0
1
2
3
4
5
6
STATE1
1
2
3
4
5
6
7
Actual signals and parameters
229