04 Fault History - ABB ACS350 User Manual

Actual signals
No. Name/Value

04 FAULT HISTORY

0401 LAST FAULT
0402 FAULT TIME 1
0403 FAULT TIME 2
0404 SPEED AT FLT
0405 FREQ AT FLT
0406 VOLTAGE AT FLT
0407 CURRENT AT FLT
0408 TORQUE AT FLT
0409 STATUS AT FLT
0412 PREVIOUS FAULT 1
0413 PREVIOUS FAULT 2
0414 DI 1-5 AT FLT
Description
Bit 3 = Reserved
Bit 4 = START ENABLE 1 MISSING
Bit 5 = START ENABLE 2 MISSING
Bit 6 = EMERGENCY STOP
Bit 7 = ENCODER ERROR
Bit 8 = FIRST START
Bit 9 = INPUT PHASE LOSS
Bit 10...15 = Reserved
Fault history (read-only)
Code of the latest fault. See chapter
history is clear (on panel display = NO RECORD).
Day on which the latest fault occurred.
Format: Date if the real time clock is operating. / The number of days
elapsed after the power-on if the real time clock is not used, or was not
set.
Time at which the latest fault occurred.
Format on the assistant panel: Real time (hh:mm:ss) if the real time clock
is operating. / Time elapsed after the power-on (hh:mm:ss minus the
whole days stated by signal
used, or was not set.
Format on the basic panel: Time elapsed after power-on in 2 second ticks
(minus the whole days stated by signal
60 seconds. E.g. Value 514 equals 17 minutes and 8 seconds (= 514/30).
Motor speed in rpm at the time the latest fault occurred
Frequency in Hz at the time the latest fault occurred
Intemediate circuit voltage in VDC at the time the latest fault occurred
Motor current in A at the time the latest fault occurred
Motor torque in percent of the motor nominal torque at the time the latest
fault occurred
Drive status in hexadecimal format at the time the latest fault occurred
Fault code of the 2nd latest fault. See chapter
Fault code of the 3rd latest fault. See chapter
Status of digital inputs DI1...5 at the time the latest fault occurred (binary)
Fault tracing for the codes. 0 = Fault
0402 FAULT TIME 1) if real time clock is not
0402 FAULT TIME 1). 30 ticks =
Fault tracing
Fault tracing
FbEq
1 = 1
1 = 1 days
1 = 1 rpm
1 = 0.1 Hz
1 = 0.1 V
1 = 0.1 A
1 = 0.1%
for the codes. 1 = 1
for the codes. 1 = 1
Actual signals and parameters
147