ABB ACS350 User Manual page 154

154
Parameters – short form list
Index Name/Selection
3421 OUTPUT3 MAX
35 MOTOR TEMP MEAS
3501 SENSOR TYPE
3502 INPUT SELECTION
3503 ALARM LIMIT
3504 FAULT LIMIT
3505 AO EXCITATION
36 TIMED FUNCTIONS
3601 TIMERS ENABLE
3602 START TIME 1
3603 STOP TIME 1
3604 START DAY 1
3605 STOP DAY 1
3606 START TIME 2
3607 STOP TIME 2
3608 START DAY 2
3609 STOP DAY 2
3610 START TIME 3
3611 STOP TIME 3
3612 START DAY 3
3613 STOP DAY 3
3614 START TIME 4
3615 STOP TIME 4
3616 START DAY 4
3617 STOP DAY 4
3622 BOOSTER SEL
3623 BOOSTER TIME
3626 TIMED FUNC 1 SRC
3627 TIMED FUNC 2 SRC
3628 TIMED FUNC 3 SRC
3629 TIMED FUNC 4 SRC
40 PROCESS PID SET 1
4001 GAIN
4002 INTEGRATION TIME
4003 DERIVATION TIME
4004 PID DERIV FILTER
4005 ERROR VALUE INV
4006 UNITS
4007 UNIT SCALE
4008 0% VALUE
4009 100% VALUE
4010 SET POINT SEL
Actual signals and parameters
Description
Sets the maximum display value for the signal selected by
parameter 3415 SIGNAL3 PARAM.
Motor temperature measurement.
Activates the motor temperature measurement function and
selects the sensor type.
Selects the source for the motor temperature measurement
signal.
Defines the alarm limit for motor temperature measurement.
Defines the fault trip limit for motor temperature measurement.
Enables current feed from analog output AO.
Time periods 1 to 4 and booster signal.
Selects the source for the timed function enable signal.
Defines the daily start time 1.
Defines the daily stop time 1.
Defines the start day 1.
Defines the stop day 1.
See parameter 3602 START TIME 1.
See parameter 3603 STOP TIME 1.
See parameter 3604 START DAY 1.
See parameter 3605 STOP DAY 1.
See parameter 3602 START TIME 1.
See parameter 3603 STOP TIME 1.
See parameter 3604 START DAY 1.
See parameter 3605 STOP DAY 1.
See parameter 3602 START TIME 1.
See parameter 3603 STOP TIME 1.
See parameter 3604 START DAY 1.
See parameter 3605 STOP DAY 1.
Selects the source for the booster activation signal.
Defines the time inside which the booster is deactivated after the
booster activation signal is switched off.
Selects the time periods for TIMED FUNC 1 SCR.
See parameter 3626 TIMED FUNC 1 SRC.
See parameter 3626 TIMED FUNC 1 SRC.
See parameter 3626 TIMED FUNC 1 SRC.
Process PID (PID1) control parameter set 1.
Defines the gain for the process PID controller.
Defines the integration time for the process PID1 controller.
Defines the derivation time for the process PID controller.
Defines the filter time constant for the derivative part of the
process PID controller.
Selects the relationship between the feedback signal and drive
speed.
Selects the unit for PID controller actual values.
Defines the decimal point location for the display parameter
selected by parameter 4006 UNITS.
Defines together with parameter 4009 100% VALUE the scaling
applied to the PID controller's actual values.
Defines together with parameter 4008 0% VALUE the scaling
applied to the PID controller's actual values.
Selects the source for the process PID controller reference
signal.
Def Custom
-
NONE
AI1
0
0
DISABLE
NOT SEL
0
0
MONDAY
MONDAY
NOT SEL
0
NOT SEL
1
60
0
1
NO
%
1
0
100
AI1