Changed Parameters Mode - ABB ACS350 User Manual

Step Action
5. • To accept the new value and continue to the setting of the next parameter,
SAVE
press .
• To stop the assistant, press

Changed Parameters mode

In the Changed Parameters mode, you can:
• view a list of all parameters that have been changed from the macro default
values
• change these parameters
• start, stop, change the direction and switch between local and remote control.
How to view and edit changed parameters
Step Action
1. Go to the Main menu by pressing
EXIT
by pressing
2. Go to the Changed Parameters mode by selecting CHANGED PAR on the
menu with keys
3. Select the changed parameter on the list with keys
value of the selected parameter is shown below it. Press
value.
4. Specify a new value for the parameter with keys
Pressing the key once increments or decrements the value. Holding the key
down changes the value faster. Pressing the keys simultaneously replaces the
displayed value with the default value.
5. • To accept the new value, press
parameter is removed from the list of changed parameters.
• To cancel the new value and keep the original, press
EXIT
.
MENU
if you are in the Output mode, otherwise
repeatedly until you get to the Main menu.
and , and pressing
SAVE
. If the new value is the default value, the
ENTER
.
and . The
EDIT
to modify the
and .
CANCEL
.
Display
LOC PAR EDIT
9906 MOTOR NOM CURR
1.2 A
EXIT 00:00 SAVE
Display
LOC MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT 00:00 ENTER
LOC CHANGED PAR
1202 CONST SPEED 1
10.0 Hz
1203 CONST SPEED 2
1204 CONST SPEED 3
9902 APPLIC MACRO
EXIT 00:00 EDIT
LOC PAR EDIT
1202 CONST SPEED 1
10.0 Hz
CANCEL 00:00 SAVE
LOC PAR EDIT
1202 CONST SPEED 1
15.0 Hz
CANCEL 00:00 SAVE
LOC CHANGED PAR
1202 CONST SPEED 1
15.0 Hz
1203 CONST SPEED 2
1204 CONST SPEED 3
9902 APPLIC MACRO
EXIT 00:00 EDIT
Control panels
77
1