ABB ACS350 User Manual page 181

Parameters – complete descriptions
Index Name/Selection
2007 MINIMUM FREQ
-500.0...500.0 Hz
2008 MAXIMUM FREQ
0.0...500.0 Hz
2013 MIN TORQUE SEL
MIN TORQUE 1
DI1
DI2
DI3
DI4
DI5
COMM
DI1(INV)
DI2(INV)
DI3(INV)
DI4(INV)
DI5(INV)
2014 MAX TORQUE SEL
MAX TORQUE 1
DI1
Description
Defines the minimum limit for the drive output frequency.
A positive (or zero) minimum frequency value defines two ranges, one
positive and one negative.
A negative minimum frequency value defines one speed range.
Note: MINIMUM FREQ < MAXIMUM FREQ.
f
2007 value is < 0
2008
Allowed frequency range
0
2007
Minimum frequency
Defines the maximum limit for the drive output frequency.
Maximum frequency
Selects the minimum torque limit for the drive.
Value defined by parameter
Digital input DI1. 0 = parameter
2016 MIN TORQUE 2 value.
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
Fieldbus interface as the source for the torque limit 1/2 selection, i.e. control
word 0301 FB CMD WORD 1 bit 15. The control word is sent by the fieldbus
controller via the fieldbus adapter or embedded fieldbus (modbus) to the
drive. For the control word bits, see section
page 262.
Minimum torque limit 1 is defined by parameter
minimum torque limit 2 is defined by parameter
Note: This setting applies only for the DCU profile!
Inverted digital input DI1. 1 = value of parameter
value of parameter 2016 MIN TORQUE 2.
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
Selects the maximum torque limit for the drive.
Value of parameter 2017
Digital input DI1. 0 = parameter
2018 MAX TORQUE 2 value.
f
2008
Allowed frequency range
2007
0
t
-(2007)
Allowed frequency range
-(2008)
2015 MIN TORQUE 1
2015 MIN TORQUE 1 value. 1 = parameter
DCU communication profile
2015
2016
2015
MAX TORQUE 1
2017 MAX TORQUE 1 value. 1 = parameter
2007 value is > 0
t
on
MIN TORQUE 1 and
MIN TORQUE 2.
MIN TORQUE 1. 0 =
Actual signals and parameters
181
Def, FbEq
0
1 = 0.1 Hz
Eur: 50 /
US: 60
1 = 0.1 Hz
MIN
TORQUE 1
0
1
2
3
4
5
7
-1
-2
-3
-4
-5
MAX
TORQUE 1
1