ABB ACS350 User Manual page 169

Parameters – complete descriptions
Index Name/Selection
FAULT(RST)
FLT/ALARM
EXT CTRL
REF 2 SEL
CONST FREQ
REF LOSS
OVERCURRENT
OVERVOLTAGE
DRIVE TEMP
UNDERVOLTAGE
AI1 LOSS
AI2 LOSS
MOTOR TEMP
STALL
UNDERLOAD
PID SLEEP
FLUX READY
USER MACRO 2
COMM
COMM(-1)
TIMED FUNC 1
TIMED FUNC 2
TIMED FUNC 3
TIMED FUNC 4
M.TRIG FAN
M.TRIG REV
Description
Fault. Automatic reset after the autoreset delay. See parameter group
AUTOMATIC RESET.
Fault or alarm
Drive is under external control.
External reference REF 2 is in use.
A constant speed is in use. See parameter group
Reference or active control location is lost.
Alarm/Fault by overcurrent protection function
Alarm/Fault by overvoltage protection function
Alarm/Fault by drive overtemperature protection function
Alarm/Fault by undervoltage protection function
Analog input AI1 signal is lost.
Analog input AI2 signal is lost.
Alarm/Fault by motor overtemperature protection function. See parameter
3005 MOT THERM PROT.
Alarm/Fault by stall protection function. See parameter
FUNCTION.
Alarm/Fault by underload protection function. See parameter
UNDERLOAD FUNC
PID sleep function. See parameter group
41 PROCESS PID SET 2.
Motor is magnetized and able to supply nominal torque.
User Macro 2 is active.
Fieldbus control signal 0134
1 = energize output.
0134 value Binary
0 000000
1 000001
2 000010
3 000011
Fieldbus control signal 0134
1 = energize output
0134 value Binary
0 000000
1 000001
2 000010
3 000011
Timed function 1 is active. See parameter group
Timed function 2 is active. See parameter group
Timed function 3 is active. See parameter group
Timed function 4 is active. See parameter group
Cooling fan running time counter is triggered. See parameter group
MAINTENANCE TRIG.
Revolutions counter is triggered. See parameter group
TRIG.
12 CONSTANT
40 PROCESS PID SET
COMM RO WORD. 0 = de-energize output,
DO RO
0 0
0 1
1 0
1 1
COMM RO WORD. 0 = de-energize output,
DO RO
1 1
1 0
0 1
0 0
36 TIMED
36 TIMED
36 TIMED
36 TIMED
Def, FbEq
31 15
16
17
18
SPEEDS. 19
20
21
22
23
24
25
26
27
3010 STALL 28
3013 29
1/ 30
33
34
35
36
FUNCTIONS. 37
FUNCTIONS. 38
FUNCTIONS. 39
FUNCTIONS. 40
29 41
29 MAINTENANCE 42
Actual signals and parameters
169