0X5344: Remc Status Register (Remc_St) - Epson S1C17001 Technical Manual

0x5344: REMC Status Register (REMC_ST)

Register name Address Bit
REMC 0x5344 D7–1 –
Status Register (8 bits)
D0
(REMC_ST)
D[7:1] Reserved
D0 REMDT: Transmit/Receive Data Bit
Sets the transmit data for data transmission. Receive data can be read when receiving data.
1 (R/W): 1 (H)
0 (R/W): 0 (L) (default)
If REMEN (D0/REMC_CFG register) is set to 1, the REMDT setting is modulated by the carrier signal
for data transmission and output from the REMO pin. For data receiving, this bit is set to the value cor-
responding to the signal level of the data pulse input.
S1C17001 TECHNICAL MANUAL
Name Function
reserved
REMDT Transmit/receive data
EPSON
21 REMOTE CONTROLLER (REMC)
Setting Init. R/W
–
1 1 (H) 0 0 (L)
Remarks
– – 0 when being read.
0 R/W
283